Popsicle Hair Clip

Popsicle Hair Clip for the 4th of July

I had been wanting to make these all summer long and then finally she put on this shirt and I just had to make a popsicle bow to go with it for her.

IMG_20160702_143653.jpg

So I made 1 to match the shirt and then made 2 other pops with the 4th of July inspiration

img_20160702_144248

img_20160702_161356

 

Here’s the measurements I used to make them.

  • 2″ of 1 1/2″ blue with white stars grosgrain
  • 4 1/2″ of 3/8″ red with white polka dots grosgrain for mini decorative bow
  • 1″ 0f 1/8″ white for bow center of mini decorative bow
  • 4 1/2″ of 3/8″ grosgrain for ribbon lined hair clip
  • 1/2″ of a  popsicle stick, score halfway with blade and then snap in half

img_20160702_143724

Here’s most of how I did it.  I left out details on repetitive bow making steps, but you can probably find tutorials on how to do those steps in my other blog posts.

  1. Cut rounded corners on blue with white stars ribbon. Cut the top corner a bit deeper in than on the bottom curves and then cut a “bite” shape into other top corner.  Use a lighter or candle as you seal it to adjust the shape of the “bite” to your liking.
  2. I cut felt for backing the popsicle to help hold it a bit more rigid so it wasn’t flopping around.  I got some very thin sturdier than normal, felt in a double sized sheet at the Hobby Lobby and that worked perfectly.  I cut it in about 1/4″ from all edges.  Adhere with hot glue.
  3. Line clip with a color similar to the popsicle stick, i used peach, it was the closest I had.
  4. Next, decide how long you want your stick to stick out the bottom and glue popsicle stick to pop.
  5. Be sure to line the clip (what I consider backwards) so that long flat side of the clip is fully lined with ribbon and bent side of clip is closer to the head.  Then glue ribbon lined clip to the back of the popsicle stick.
  6. Finally, make a mini decorative bow and add that to the front.  You don’t have to have that bow, but I think they look way cuter that way.

Wear the bow alone, or clip onto another bigger bow 🙂

img_20160703_152105

Pinwheel with Princess Castle Bottlecap

This is a double layer pinwheel with a bottle cap of a pink and purple princess castle.

  • 11 1/2″ of 7/8″ shocking pink made into no tails pinwheel on 2 1/2″ bow template
  • 16″ of 1 1/2″ light pink made into no tails pinwheel on 3 1/2″ bow template
  • stack bows, mount on medium french clip with 3/8″ shocking pink center wrap
  • embellish with Princess Castle bottle cap

img_20160622_091149