4th of July Over the Top Bow, “Star Spangled Cutie”

4th of July Over the Top Bow with “Star Spangled Cutie” removable/changeable bottle cap

Date Created: 7/2016
Difficulty Level: Advanced
Time to Complete: 30+ minutes
Pricing: $7.00
IMG_20170310_154815
Materials Needed:
  • 3/8″ ribbon
    • red with white dots
    • navy& white lollipop stripes
  • 7/8″ ribbon
    • turquoise
    • white
    • navy
    • red & white stripe
  • 50-60cm french clip
  • 1.75″ alligator clip
  • 1″ bottle cap image
  • 1″ epoxy dot
  • 1″ bottle cap
  • E6000 glue
  • scissors
  • needle and thread
  • hot glue gun
  • lighter or heat seal source
Measurements: (and what the pieces are for)
  • 16″ of 7/8″ turquoise for boutique bow
  • 5″ of 3/8″ red with white dots for center
  • 4.5″ of 3/8″ red with white dots for clip liner
  • 6″ of 3/8″ red with white dots for center wrap
  • (2) 9″ of 3/8″ red with white dots for top bow surround
  • (2) 9.5″ of 3/8″ white & navy lollipop stripes for bottom bow surround
  • Spikes (all 4″, but I think 4.5″ would have worked better on this bow)
    • (2) 7/8″ turquoise
    • (2) 7/8″ white
    • (2) 7/8″ navy
    • (1) 7/8″ red & white stripe
Note:
After making boutique bow, it measured 3″ from corner to corner. So to measure the spikes I added 1″ and cut them at 4″.  However, these spikes ended up a bit too short and didn’t stick out under the bow at all.  I would try measuring spikes to be 1.5″ longer than longest length of the boutique bow.
Instructions:
Sorry, no tutorial available yet for this one.  Please add a comment below if you’d like to request to see instructions on how to make this bow.

Tattered Layers Badge Pull for St. Luke’s School of Nursing

Date Created: 7/16/2016
Difficulty Level: Beginner
Time to Complete: 20 minutes?
Pricing: $5+

Materials Needed:

  • White material
  • Navy material
  • 1″ bottle cap image of St. Luke’s
  • 1″ epoxy dot
  • 1″ flattened bottlecap
  • E6000 glue
  • Hot glue gun
  • Badge pull

Measurements: (and what the pieces are for)

  • (4) 2 1/8″ navy flower circles, tattered
  • (4) 2 3/4″ white flower circles, tattered

Instructions:

  • Cut material into flower petal shapes using a template or free cut rounded edges, approx 5 petal bumps on each.
  • Roll material between palms to tatter and great edges.
  • Open petals and fold in half, then quarter.
  • Place glue on inside of quartered petal, but not too close to what will be the middle.
  • Repeat for each petal. 
  • Snip corner of each petal.
  • Overlap and glue petals together, slightly overlapping previous one. 
  • Glue blue layer of petals on top of white layer of petals. 
  • Using a 1″ hole cutter, cut out the photo. 
  • Place epoxy dot on top of photo.
  • Use E6000 glue to adhere the photo to the bottlecap. (It will stay tacky until well after you finish the bow in case you need to adjust centering of the photo on the bottlecap. )
  • Glue 1″ felt circle on back of flower. 
  • Glue 1″ felt circle to back of bottle cap.
  • Glue bottle cap to bow.
  • Glue bow to badge pull.

BIG Pinwheels

This is an attempt to catalogue and list all the BIG pinwheels I have made lately.  I am always playing with the length of ribbon and sizing to see what I like best, so they are all just slightly different from each other.

Neon Pink & White

  • 22″ of 2 1/4″ white made into no tails pinwheel on 4 1/2″ template
  • 10″ of 2 1/4″ hot pink made into bow tie
  • wrap center with 3/8″ glitter white

img_20160916_231222

Hot Pink & Yellow

  • 20″ of 2 1/4″ hot pink made into no tails pinwheel on 4 1/4″ template
  • 8″ of 2 1/4″ yellow made into bow tie
  • ribbon lined french clip with 3/8″ hot pink
  • wrap center with 3/8″ hot pink
  • made to match hot pink & yellow animal print bikini

img_20160916_231320

Black

  • 22″ of 2 1/4″ black made into no tails pinwheel on 4 1/2″ template
  • used to clip watermelon ribbon sculpture onto it
  • (love this simple style to add to my own ponytails)

img_20160916_231408

Tiana Apple Green & Lilac Purple

  • 20″ of 2″ lilac purple made into no tails pinwheel on 4 1/4″ template (yes, not 2 1/4″)
  • 14 1/2″ of 7/8″ apple green made into no tails pinwheel on 3″ template
  • made to match a darker purple Tiana shirt

img_20160916_231518

Navy & Neon Pink

  • 20″ of 2 1/4″ navy made into no tails pinwheel on 4 1/4″ template
  • 8″ of 2 1/4″ neon pink made into bow tie
  • made to match “My sister is awesome” t-shirt

img_20160916_231150

Shocking Pink (unfinished)

  • 22″ of 2 1/4″ shocking pink made into no tails pinwheel on 4 1/2″ template

IMG_20160916_212730.jpg

 Big Red Pinwheel

  • 20″ of 2 1/4″ red on 4 1/4″ template
  • bow = 4 1/2″ wide
  • 9″ of 1 1/2″ white for bow tie on top, next time try 1/2″-1″ less than measurement of underneath bow or previous layer

I think this is the one I put a cute bottle cap on and Kaylin picked as her favorite bow

 

 

Pinwheels with Spikes and Mustache Bottle Cap

Stacked pinwheels with no tails and a layer of spikes with bottle cap with a mustache

IMG_20160610_220557.jpg

Pinwheel, 2 stacked no tail pinwheels on spikes with mustache bottle cap

  • 12″ of 7/8″ RABOM aqua to make pinwheel with no tails on 2 3/4″ template
  • 16″ of 1 1/2″ hot pink to make pinwheel with no tails on 3 1/2″ template
  • (2) 5 1/4″ of 1 1/2″ black for spikes
  • Mounted on french clip

Pinwheel with “Mommy Makes My Bows” Bottle Cap

Stacked no tail pinwheels with spikes and bottle cap

 

  • 12″ of 7/8″ black to make no tails pinwheel on 2 3/4″ template
  • 16″ of 1 1/2″ white to make no tails pinwheel on 3 1/2″ template
  • (2) 5″ of 1 1/2″ shocking pink to make 2 spikes
  • Stack bows
  • 4-5″ of 3/8″ ribbon for center
  • Mounted on french clip
  • Top with bottle cap

Pinwheel with Princess Castle Bottlecap

This is a double layer pinwheel with a bottle cap of a pink and purple princess castle.

  • 11 1/2″ of 7/8″ shocking pink made into no tails pinwheel on 2 1/2″ bow template
  • 16″ of 1 1/2″ light pink made into no tails pinwheel on 3 1/2″ bow template
  • stack bows, mount on medium french clip with 3/8″ shocking pink center wrap
  • embellish with Princess Castle bottle cap

img_20160622_091149